STARLAPSE SYSTEM - TELESCOPE ACCESSORIES - REPLACEMENT PARTS - DEALERS - PRICE LIST - TECHNICAL SUPPORT
ORDERING via SHOPPING CART - ORDERING INTERNATIONAL - ORDERING CUSTOM PARTS OR UNLISTED PARTS- USERS - NEW
| PART NO. | PRICE | DESCRIPTION | |
|
| |||
| AKS | $27.00 | Altitude Lock Knob Set (2) | |
 Click for larger image |
 Click for larger image | ||
|
| |||
| CKSS | $20.00 | Clutch Knob Spacer Set (2) | |
 Click for larger image |
 Click for larger image | ||
|
| |||
| CKSW | $7.50 | Clutch Knob Spring Washer, G-11 GM 8 and G9, Set of 2 | |
 Click for larger image |
|||
|
| |||
| CKTB | $75.00 | Clutch Knob Thrust Bearing, G-11, GM 8 and G9, Set of 2 | |
 Click for larger image |
|||
|
| |||
| CP11 | $15.00 | Clutch Pads for G-11, Set of 2 | |
 Click for larger image |
|||
|
| |||
| CP8 | $15.00 | Clutch Pads for GM 8 and G9 Mounts | |
 Click for larger image |
|||
|
| |||
| CWS | $110.00 | Counterweight Shaft for G-11, GM 8 and G9 Mounts | |
 Click for larger image |
|||
|
| |||
| CWSS | $8.00 | Counterweight Shaft Safety Screw and Washer | |
 Click for larger image |
|||
|
| |||
| CWTS | $8.00 | Counterweight Thumb Screw, State Weight, Size | |
 Click for larger image |
|||
|
| |||
| DDB8 | $200.00 | Digital Drive Board for GM 8 and G9 | |
 Click for larger image |
|||
|
| |||
| DDB11 | $200.00 | Digital Drive Board for G-11 | |
 Click for larger image |
|||
|
| |||
| DDCK | $15.00 | Digital Drive Case Knobs, Set of 2 | |
 Click for larger image |
|||
|
| |||
| DHC | $270.00 | De Luxe Hand Controller - for Gemini 1 | |
 Click for larger image |
|||
|
| |||
| DHCC | $15.00 | De Luxe Hand Control Cable | |
|
| |||
| DS | $6.00 | Dovetail Plate Screw for Mounting Plate to Curved Block, Set of 4 | |
 Click for larger image |
|||
|
| |||
| DSK | $3.00 | Dovetail Plate Safety Knob, Set of 2 | |
 Click for larger image |
|||
|
| |||
| GMCRA | $12.00 | Gemini 1 & 2 Motor Cable RA, Din Type | |
 Click for larger image |
|||
|
| |||
| GMCDEC | $15.00 | Gemini 1 & 2 Motor Cable DEC, Din Type | |
 Click for larger image |
|||
|
| |||
| HC | $70.00 | Hand Controller | |
 Click for larger image |
|||
|
| |||
| HCS | $7.50 | Hand Control Splitter, for Auto-guiders | |
 Click for larger image |
|||
|
| |||
| MC | $25.00 | Motor to Worm Coupling | |
 Click for larger image |
|||
|
| |||
| MGTB11 | $125.00 | Main Gear Thrust Bearing W/ Spacer, for R.A. and Dec. Axis, G-11, Set of 2 | |
 Click for larger image |
|||
|
| |||
| MGTB8 | $85.00 | Main Gear Thrust Bearing, for R.A. and Dec. Axis, GM 8 and G9, Set of 2 | |
 Click for larger image |
|||
|
| |||
| NB | $25.00 | Needle Bearing for R.A. or Dec. Axis, Set of 2 | |
 Click for larger image |
|||
|
| |||
| PSI | $45.00 | Polar Scope Illuminator W / Built-in Battery Powered LED | |
  Click photos for larger image |
Our completely redesigned PSI will illuminate the alignment reticle of
the PS polar scope with five different intensities in both constant and
flashing modes. A microprocessor activates the red LED in the selected
mode, then automatically turns off after two minutes | ||
|
| |||
| PSR | $60.00 | Polar Scope Reticle - Good to 2030 | |
 Click for larger image |
|||
|
| |||
| RACKC | $25.00 | R.A. Clutch Knob Cap | |
 Click for larger image |
|||
|
| |||
| SC11 | $100.00 | R.A. and Dec. Setting Circle Set, for G-11 | |
 Click for larger image |
|||
|
| |||
| SC8 | $65.00 | R.A. and Dec. Setting Circle Set, for GM 8 | |
 Click for larger image |
|||
|
| |||
| SM | $85.00 | Stepper Motor W / PC Board | |
 Click for larger image |
|||
|
| |||
| SMCC | $15.00 | Stepper Motor Coiled Cord | |
 Click for larger image |
|||
|
| |||
| SMCP | $10.00 | Stepper Motor Cove, Plastic | |
 Click for larger image |
|||
|
| |||
| SMPC | $15.00 | Stepper Motor PC Board | |
 Front Rear Click for larger image |
|||
|
| |||
| SPC8/11 | $50.00 | Saddle Plate Clamp, GM 8 and G11 | |
 Click for larger image |
|||
|
| |||
| SPK | $12.00 | Saddle Plate Knob | |
 Click for larger image |
|||
|
| |||
| SPS | $5.00 | Saddle Plate Spring | |
 Click for larger image |
|||
|
| |||
| SPTS8 | $3.00 | Saddle Plate Threaded Shaft, GM 8 and G9 | |
 Click for larger image |
|||
|
| |||
| SPTS11 | $3.00 | Saddle Plate Threaded Shaft, G-11 | |
 Click for larger image |
|||
|
| |||
| SVGB | $35.00 | Gemini Servo Motor Gearbox only | |
 Click for larger image |
|||
|
| |||
| SVM-HT | $225.00 | Gemini High Torque Servo Motor and Encoder | |
 Click for larger image |
|||
|
| |||
| TEE HANDLE 1/4 | $1.00 | Plastic Press On Tee Handle for 1/4 Bolts | |
 Click for larger image |
|||
|
| |||
| TEE HANDLE 3/8 | $1.00 | Plastic Press On Tee Handle for 3/8 Bolts | |
 Click for larger image |
|||
|
| |||
| TS | $5.00 | Tripod Screws, Set of 3 | |
 Click for larger image |
|||
|
| |||
| WB | $25.00 | Worm Bearings, Set of 2 | |
 Click for larger image |
|||
|
| |||
| WBB | $35.00 | Worm Bearing Blocks, Set of 2 | |
 Click for larger image |
|||
|
| |||
| WORM | $60.00 | High Precision Worm | |
 Click for larger image |
|||
|
| |||
| ALL SPECIFICATIONS MAY AND WILL CHANGE WITHOUT
NOTICE | |||
|
Hollywood General Machining, Inc. For More Information Contact: Hollywood General Machining, Inc. | |||